How to use your Lomo Diana Camera
Tuesday, January 12th, 2010Have you just bought or been bought a crazily cool Lomo Diana F or F+ camera and you know you can take amazing photos on it but you just don’t know quite how? Well just in case, we’ve hunted down some of the most useful websites we can find to give you all the best tips.
If you’re looking to buy a Diana camera click here

You can take 16 colour or Black/White pictures. It is advisable to take colour pictures on sunny days.
How to Load Film:
It is important when loading or unloading film to keep camera away from direct light. To open the camera turn the catch at the bottom to the word “OPEN”, then pull the back cover downwards. Put the empty spool in the upper spool chamber and swing out the lower spool holder. Put the film in the lower pool chamber with the tapered end of the backing paper towards the empty spool, then swing the spool holder back into the spool chamber.
Remove the adhesive strip of the roll film and pull out the backing paper. Insert the tapered end into the slot in the empty spool and turn the winding knob slowly to ensure that that film runs properly.
To close the camera put the back cover in position and turn the catch at the bottom of the word “LOCK”. Turn the winding knob in the direction of the arrow until the number “1” appears in the red window. NOW THE CAMERA IS READY FOR TAKING PICTURES
How to Take Pictures:
DON’T FORGET TO TAKE OFF THE LENS CAP!
First of all determine if the weather is Bright, Cloudy or Dull and set the aperture setting. Look through the view finder and aim at the object. Ascertain the distance from the object to the camera and set the distance setting.
Look through the view finder again and compose the picture. Then press the shutter release slowly downwards. The picture is taken. Turn the winding knob until the next number is seen in the red window. Repeat the above procedure until 16 pictures have been taken.
How to Unload Film:
Turn the winding knob until the film is completely wound into the taking spool. Open the camera as indicated above and take out the exposed film for developing.
How to Use “Bulb” shutter:
The “Bulb” shutter is only used when taking pictures indoors where the light is insufficient. On pressing down the shutter lever the lens remains open until released. In view of this it is important that the camera must be put on a firm place and kept steady.
If you’re struggling with how to load a film into your Diana this youtube video should help.
Lots of information on your Diana can be found on Dianacamera.com









